brushless regulators

 

 

 

Loading
        Activity &
Production


- System division
- Systems & automation
- Planning & software

- Abrasive division  New
brushless regulators
 
brushless regulators
THECNICAL DESCRIPTION
The MULTIDRIVE drive is a galvanically separated digital converter with microprocessor used for IGBT modules.
The control parameters are set by a front keyboard or by a serial line. The multidrive is available in two models with the following power supply, that can be performed directly from the network:
  • three-phase 180-240V, 50/60 HZ for the model DB-200n
  • three-phase 350-460V, 50/60 HZ for the model DB-400n
  • reading of the motor resolver speed and position
  • analog reference (+- 10V) from the terminal board
  • digital reference adjustable by keyboard or serial line
  • resolver automatic check and timing
  • built-in braking circuit, optional resistance to be connected externally
  • internal cooling fan, where required
  • timed protections shown on the display or by the serial line: motor overheating, tension min. or max., power alarm when IGBT is locked
  • display of instantaneous speed in rpm
  • programmming parameters shown on the display or by the serial line
  • functioning status and mode shown on the display
  • double track encoder output with zero pulse programmable between 64/128/256/512/1024 pulses/revolution
  • parameter storage on eeprom


TECHNICAL DATA
 
DB-200n
DB-400n
Effective voltage of threephase power supply
180-240V
350-460V
Power supply frequency
45-65 Hz
45-65 Hz
Maximum threephase effective voltage of output
150-200 V
310-400 V
Output frequency field
0-400 Hz
0-400 Hz
Maximum voltage on d.c. circuit (on braking)
380 V
720 V
Modulating frequency for the power
7.8 KHz
7.8 KHz
Maximum voltage of speed reference
+- 10 V
+- 10 V
Maximum voltage of torque reference
+- 10 V
+- 10 V
Maximum signal of output speed
+- 10 V
+- 10 V
Maximum signal of output current
+- 10 V
+- 10 V
Enviroment temperature field
0-50°C
0-50°C
Enviroment power reference
40°C
40°C


SIZE OF DB-200n DRIVE
MODEL DB-203n DB-205n DB-210n DB-215n DB-220n DB-230n DB-240n DB-260n
Rated RMS current (A)
3.5
6
10
15
20
30
40
60
Maximum RMS current (A)
7
12
20
30
40
60
80
120
Braking peak current (A)(t<0.3s)
15
23
45
70
Braking continuative current (A)(t<0.3s)
2
4
5
10
15
Sizes
A 68 mm
A 100
mm
A 130 mm
A 192
mm
Weight (kg)
5.2
7
8.7
9.5


SIZES OF DB-400n DRIVE
MODEL
DB-403n
DB-407n
DB-415n
DB-422n
DB-428n
DB-437n
DB-447n
DB-480n
Rated RMS current (A)
3.5
7
12
22
28
37
47
80
Maximum RMS current (A)
7
14
30
44
56
74
94
120
Braking peak current (A)(t<0.3s)
9
18
22
40
60
Braking continuative current (A)(t<0.3s)
2
3
5
10
20
Sizes
A 68mm
A 100 mm
A 130 mm
A 192 mm
OPEN FRAME
Weight (kg)
5.2
7
8.7
9.5
-


A = See tables

B = 290 mm

C = 310 mm

D = 330 mm
 
 



     
Mipro s.r.l. - Offices: via Terni, 2 - Receiving Goods: via Novati, 10 VAREDO - (MB) - Tel. 0362 57.11.33 - Fax 0362 57.11.35
E-mail: info@miprosyn.com
P.IVA: IT02851150967 - Cod. Fisc: 09237820155 - R.E.A. Milano 1292571 - Cap.soc.: 46.800,00 euro - PRIVACY